Super easy application process!
Follow these steps for proper coloring of your temporary tattoo.
STEP 1
Clean the area where you will get the tattoo thoroughly . We must make sure there is no hair or dead skin, as this could impair the skin's absorption.
STEP 2
If your skin is very dry , we recommend applying moisturizer 1 hour before getting your tattoo. This will help the ink absorb better.
STEP 3
Remove the outer wrapping and then the second sheet covering the ink. Be careful not to wet or soil the sheet during this step.
STEP 4
Place the tattoo with the adhesive side against the skin (Ovlem side facing up). Carefully fit the tattoo into the chosen area and adjust if necessary.
STEP 5
Using a damp cloth or water spray, moisten the paper area. Do not use too much water, as this could cause the paper to slip and affect the final finish.
STEP 6
Once the paper is moistened, apply even pressure (without moving it) for 50 seconds until it is completely adhered. Then lift it and check that the entire design is on the skin. It will appear transparent; do not scrape or wet the area.
STEP 7
Just wait! The tattoo will look transparent and will gradually darken in about 3 days (depending on your skin).
